910-269-EN, Rev. B, June 2011
56 Chapter 3
Figure 3-8 Example of software indicators
3.1.7 About Permanent Parameters
Two buttons for common and important parameters (Angle and Gain) always appear
at the top-right corner of the software main display. This allows you to easily see their
respective values.
Press the [ANGLE] or the [GAIN] direct-access key to respectively select the Angle or
the Gain parameter. Once selected, the button appears yellow (see
Figure 2-5 on
page 46). Turn the adjustment knob or press the [UP] and [DOWN] arrow keys to edit
the value.
Table 8 Software indicators
Indicator Icon Description
Operation mode Instrument in phased array mode
Instrument in conventional UT mode
Scan type S-scan sector scan
Battery charge Indication (%) of the remaining battery charge
Leg indicator Indicates leg of gated signal for gates 1, 2 and/or IF
gate in the format <gate>L<leg #>
Battery charge indicator
Scan type indicatorOperation mode indicator
Leg indicator
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
