Olympus EPOCH 1000 Series - Meas Setup Page; Figure 3-17 the Meas Setup Page

910-269-EN, Rev. B, June 2011
EPOCH 1000 Series Software Features 71
3.3.3 Meas Setup Page
The Meas setup page, shown in Figure 3-17 on page 71, is accessible by choosing 3/5 >
Meas Setup > Reading Setup. This page allows you to select which measurement
appears in the measurement reading boxes at the top of the software main display
(see section
3.1.9 on page 57).
Figure 3-17 The Meas setup page
The available parameters are:
Meas Selection
Used to set the measurement reading box definition mode to be automatically
selected based on instrument function (Auto), or to be manually defined
(Manual).
Description
Used to select custom measurement schemes loaded using the GageView Pro
interface program.
Example of the
measurement
reading boxes
Downloaded from ManualsNet.com search engine