910-269-EN, Rev. B, June 2011
78 Chapter 3
Mode
Used to set the hour display mode (AM, PM, or 24H) for the instrument internal
clock.
3.3.5 Owner Info (Inst Setup Group)
The Owner Info setup page, shown in Figure 3-20 on page 78, is accessible by
choosing 3/5 > Inst Setup > Owner Info. The page allows you to input up to five lines
of text displayed during start up, at the end of the start-up screens. This text is
typically used to show owner or company information, including address and phone
number.
Figure 3-20 The Owner Info setup page
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
