Olympus EPOCH 1000 Series - Figure 3-14 the Beam Setup Page and Its Elements

910-269-EN, Rev. B, June 2011
EPOCH 1000 Series Software Features 67
Figure 3-14 The Beam setup page and its elements
A title bar identifies the setup page. Parameters appear in a table form with the
parameter label in the column on the left and its current value and units (if applicable)
in the column on the right. A series of seven buttons appears at the bottom of setup
pages and contain available values corresponding to the currently selected parameter.
Press [ESCAPE] to leave a setup page. With a USB keyboard connected to the
EPOCH
1000 Series, pressing the ESCAPE key also allows you to leave a setup page.
The following sections describe the available setup pages.
Title bar
Currently selected parameter
Available values for the selected
parameter
Downloaded from ManualsNet.com search engine