Olympus EPOCH 1000 Series - 2.3 Using Battery Power

910-269-EN, Rev. B, June 2011
42 Chapter 2
Figure 2-3 The AC adaptor plug
To use AC line power
1. Connect the power cord to the charger/adaptor unit and to an appropriate line
power source.
Use only the AC power cord supplied with the EPOCH 1000 Series instrument.
Do not use this AC power cord with other products.
2. Remove the rubber seal over the AC adaptor port on the back of the EPOCH 1000
Series instrument.
3. Connect the DC output power cable from the charger/adaptor to the AC adaptor
input jack (see
Figure 2-3 on page 42).
4. Turn on the EPOCH 1000 Series by pressing the front panel power key (see
Figure 2-1 on page 40).
The front panel power indicator activates (see Figure 2-1 on page 40).
2.3 Using Battery Power
The EPOCH 1000 Series operates with its standard rechargeable lithium-ion (Li-ion)
battery (PN: EPXT-BAT-L).
AC adaptor plug
Downloaded from ManualsNet.com search engine