Olympus EPOCH 1000 Series - Figure 9-1 Example of a Gated Calibration Signal; Figure 9-2 the Enter Value for Zero Cal Dialog Box

910-269-EN, Rev. B, June 2011
138 Chapter 9
A thickness measurement reading appears in large text above the A-scan (see
Figure 9-1 on page 138).
Figure 9-1 Example of a gated calibration signal
7. Once a steady reading is achieved, choose 1/5 > Auto CAL > CAL Zero.
The screen freezes and the Enter Value for Zero Cal dialog box appears (see
Figure 9-2 on page 138).
Figure 9-2 The Enter Value for Zero Cal dialog box
Thickness measurement
Downloaded from ManualsNet.com search engine