Olympus EPOCH 1000 Series - Figure 1-12 the Connectors Behind the Computer Connection Compartment Door; Table 5 Computer Connection Compartment Connectors

910-269-EN, Rev. B, June 2011
34 Chapter 1
Figure 1-12 The connectors behind the computer connection compartment door
Table 5 Computer connection compartment connectors
Connector Qty. Usage
USB client
1
Used to connect the EPOCH 1000 to a computer. The
instrument is compatible with the Olympus GageView Pro
software (see section 3.5 on page 86 and section 8.5.1 on
page 131).
USB hosts
2
Used to connect USB peripherals such as a printer, a
keyboard, a mouse or a storage device (see section 8.5.2 on
page 131).
VGA/RS-232
1
Combination connector.
Used to connect an external VGA video monitor. This
feature is useful for presentations, training, and remote
instrument monitoring (see section 8.1 on page 127).
Used to establish an RS-232 communication link (see
section 8.4 on page 131).
USB client connector
USB hosts connectors (2)
VGA/RS-232 output
connector
Thumb screws (2)
Downloaded from ManualsNet.com search engine