Olympus EPOCH 1000 Series - Saving Screen Captures; Figure 10-9 the Print Function in the Reportsetup Setup Page

910-269-EN, Rev. B, June 2011
190 Chapter 10
10.5 Saving Screen Captures
You can save screen captures of the EPOCH 1000 Series software either to the
CompactFlash card included with the instrument or to a USB storage device
connected to the instrument. This allows you to quickly capture live inspection data
information for use in reports.
To save a screen capture
1. Choose 5/5 > Files > Page Setup to open the ReportSetup setup page.
2. Choose Print Function, and then select the save destination for the screen capture
file:
a) Select Image->CF to save screen capture files to the CompactFlash card.
OR
b) Choose Image->USB to save screen capture files to the USB storage device
connected to a USB host port of the EPOCH
1000 Series.
Figure 10-9 The Print Function in the ReportSetup setup page
Downloaded from ManualsNet.com search engine