910-269-EN, Rev. B, June 2011
EPOCH 1000 Series Software Features 51
Figure 3-2 Overview of the menu system in UT operation mode
The menu indicator, located in the lower-right corner of the software main display,
shows which menu is currently selected (see
Figure 3-3 on page 51). For example, the
menu indicator showing , means that there are five standard available menus and
that the first one is currently selected.
Figure 3-3 The menu indicator (1/5)
Parameters (7) belonging to the Pulser
submenu
2/5 3/5 4/5 5/51/5
Selected menu with its five submenu buttons
Menu indicator
Selected parameter with focus
Selected submenu
With the focus on one of the submenu
buttons, turn the adjustment knob to
select one of the available menus
Other available menus
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
