910-269-EN, Rev. B, June 2011
196 Chapter 11
If a software option is not activated, you do not have access to the submenu that
controls this function. Olympus can provide an activation code that is entered in the
instrument and allows access to the option. This allows the software to be activated
without having to return the instrument to a service center.
To activate a software option
1. Choose 3/5 > Inst Setup > Status to open the Status setup page shown in
Figure 11-1 on page 196.
Figure 11-1 The Option key entry dialog box
2. Note the 16-character software serial number for your instrument that appears in
the S/N parameter.
3. Contact Olympus to purchase the software option, providing the software serial
number.
Olympus provides an activation code.
4. Once this remote activation code is provided, open the Status setup page.
Enter software
option activation
code here
Software serial
number
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
