Olympus EPOCH 1000 Series - Managing Phased Array Image Display; Display View Mode

910-269-EN, Rev. B, June 2011
Managing Phased Array Image Display 253
14. Managing Phased Array Image Display
This chapter describes how to manage EPOCH 1000 Series display settings in the
phased array mode. Topics are as follows:
• Display View Mode
• Focal Law (Angle) Selection Cursor
• Best Fit Mode
• Image and A-Scan Grid and Rulers
• Peak Memory
• Peak Hold
• Freeze
• Display Grid Modes and Overlays
14.1 Display View Mode
In phased array mode, the EPOCH 1000 Series offers four live inspection views
accessible by choosing 1/5
> PA Display > Screen:
A/S Vert
Selected A-scan and S-scan are both viewable. A-scan is oriented vertically and
located on the left side of display.
Sscan
Only S-scan is viewable.
Ascan
Only the selected A-scan is viewable (standard conventional UT display).
Downloaded from ManualsNet.com search engine