910-269-EN, Rev. B, June 2011
60 Chapter 3
Indicates that the [2
nd
F] key has been pressed.
Gate 1 is in peak measurement mode.
Gate 2 is in peak measurement mode.
Gate 1 is in edge (or flank) measurement mode.
Gate 2 is in edge (or flank) measurement mode.
Gate 1 is in first-peak measurement mode.
Gate 2 is in first-peak measurement mode.
Indicates that an alarm for gate 1 and/or gate 2 has been triggered.
Flashes on and off alternating with gate-measurement indicator.
AVG is active.
AWS D1.1/D1.5 is active.
Calibration is active.
Access to Gain, Auto CAL, PA Cal, CAL Zero, Velo ci ty, Angle,
Pulser, Receiver, and PA P/R is locked
(see section 3.3.4 on
page 76).
Curved surface correction (CSC) is active.
DAC/TVG is active.
Table 9 Flag description (co nti nued)
Flag Description
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
