Panasonic VR2 Series - Init-Ib; Init-Ip; I-Pfall; I-Prise

16-18
16-5-17. INIT-IB
Format
INIT-IB [Value]
Function It adjusts the initial base amperage. Value
Adjustment value [−50 - ＋50]
Condition
Lock condition Arc lock (Internal execution).
Syntax check None.
Example Set the initial base current to +1.
INIT-IB +1
The same command in
conventional models

16-5-18. INIT-IP
Format
INIT-IP [Value]
Function It adjusts initial peak amperage. Value
Adjustment value [−50 - ＋50]
Condition
Lock condition Arc lock (Internal execution).
Syntax check None.
Example Set the initial peak amperage to +1.
INIT-IP +1
The same command in
conventional models

16-5-19. IP
Format
IP [Peak amperage]
Function It adjusts peak amperage.
Condition Weld package.
Lock condition Arc lock (Internal execution).
Peak
amperage
Panasonic fully digital welding
power sources: [-50 - +50]
Other power sources: [-5 - +5]
Syntax check None.
Example Adjust the system set value by +1.
IP = +1
The same command in
conventional models
IP
16-5-20. I-PFALL
Format
I-PFALL [Value]
Function It adjust s gradient of falling pulse current. Value
Adjustment value [−7 - ＋7]
Condition
Lock condition Arc lock (Internal execution).
Syntax check None.
Example Adjust the falling pulse gradient by +1.
I-PRISE +1
The same command in
conventional models

16-5-21. I-PRISE
Format
I-PRISE [Value]
Function It adjust s gradient of rising pulse current. Value
Adjustment value [−7 - ＋7]
Condition
Lock condition Arc lock (Internal execution).
Syntax check None.
Example Adjust the rising pulse gradient by +1.
I-PRISE +1
The same command in
conventional models
