16-7
16-3-10. REM
Format
REM [comment]
Function Comment
Use it to add comments in a file for
easy understanding of the file.
Comment Comment character string.
(max. 32 characters)
Condition Standard.
Lock condition None.
Syntax check None.
Example Add a comment “Start welding”.
REM Start welding
16-3-11. RET
Format
RET
Function Return to the calling (original) program.
It terminates the current running program and resume operation of the original program.
If the current running program is the original program, then it ends the program.
Condition Standard.
Lock condition None.
Syntax check None.
Example
RET
The same command in conventional models
RETPRG
16-3-12. RSV_CANCEL
Format
RSV_CANCEL
Function Use it to clear all lists of the reserved programs.
Condition Standard.
Lock condition None.
Syntax check None.
Note The command is effective only when “Program select in Auto start method is selected.
16-3-13. RSV_PROG
Format
RSV_PROG [program name]
Function Use it to add a program at the bottom of the
reserved program list.
Program name A program file name to be
reserved.
Condition Standard.
Lock condition None.
Syntax check None.
Note The command is effective only when “Program
select in Auto start method is selected
The same command in
conventional models
RSVJOB
16-3-14. STOP
Format
STOP
Function It terminates the current operation
Condition Standard.
Lock condition None.
Syntax check None.
Example
STOP
The same command in conventional models
STOP
To Next Page