RADWAG PUE 7.1

192
Product -
Name of the controlled product.
Code -
Code of the controlled product.
-
Nominal value of the controlled product.
-
Average mass of the controlled product.
-
Sum of carried out measurements.
-
The value of standard deviation.
-
Characteristics of sample’s negative errors T1
-15g - value of negative error T1,
Max T1 - permissible quantity of negative errors T1,
n T - actual quantity of negative errors T1.
-
Characteristics of sample’s negative errors T2 -45g
- value of negative error T2,
Max T2 - permissible quantity of negative errors T2,
n T2 - actual quantity of negative errors T2.
-
Characteristics of sample’s positive errors T1
+20g - value of positive error T1,
Max T1 - permissible quantity of positive errors T1,
n T - actual quantity of positive errors T1.
-
Characteristics of sample’s positive errors T2
+40g - value of positive error T2,
Max T2 - permissible quantity of positive errors T2,
n T2 - actual quantity of positive errors T2.
Put full 1/30
-
Prompt presenting process course.