193
Net
-
Net weight of the controlled product.
-
Information on the control process.
-
Workspace modification: numerical data / graph.
-
Abort control process.
-
Confirm measurement.
• Control status
During control process „Control status” parameter is active. It indicates
one of three values with suitable visualization.
Positive
The workspace colour remains the same.
Warning
The workspace is yellow.
Negative
The workspace is red.
- „Warning” status. Error T1 has occurred
but the declared tolerance has not been
exceeded.
- „Negative” status. Actual quantity of
negative errors -T2 has exceeded permissible
quantity.
• Information on the control process
Upon pressing
button, information about an ongoing control is displayed:
To Next Page
Loading...
