CMU RF Measurements
1100.4903.12 6.31 E-10
CONFigure:RFANalyzer:EREPorting <Mode> Event Reporting
<Mode>
Parameter description Def. value Def. unit FW vers.
SRQ |
SOPC |
SRSQ |
OFF
Service request
Single operation complete
SRQ and SRSQ
No reporting
OFF – V1.15
Command description
This command defines the events generated when the measurement is terminated or stopped (event reporting,
see chapter 5).
FETCh:RFANalyzer:STATus? Measurement status
Returned value
Parameter description Def. value Def. unit FW vers.
OFF |
RUN |
STOP |
ERR |
STEP |
RDY,
1 to 10000 |
NONE,
Measurement in the OFF state (*RST or ABORt)
Running (after INITiate, CONTinue or READ)
Stopped (STOP)
OFF (could not be started)
Stepping mode (<stepmode>=STEP)
Stopped according to repetition mode and stop condi-
tion
Counter for current evaluation period
Counter not used
OFF
NONE
–
–
V1.15
Command description
This command is always a query. It returns the status of the measurement (see chapters 3 and 5).
To Next Page
Loading...
Need help?
General
