Rohde & Schwarz CMU 200 - Fig. 8-6 Pin Assignment of the MONITOR Connector; Fig. 8-7 Pin Assignment of the KEYBOARD Socket; Keyboard Connector (KEYBOARD); Monitor Connector (MONITOR)

CMU Hardware Interfaces
1100.4903.12 8.11 E-8
Monitor Connector (MONITOR)
The 15-pin Sub-D female connector MONITOR at the rear panel of the CMU is intended for connecting
an external VGA monitor.
MONITOR
1
10
5
15
6
11
Fig. 8-6 Pin assignment of the MONITOR connector
Keyboard Connector (KEYBOARD)
The 6-pole Mini DIN female connector KEYBOARD at the rear of the instrument is intended for
connecting an external keyboard. .
Fig. 8-7 Pin assignment of the KEYBOARD socket
Pin No. Signal
1 RED (output)
2 GREEN (output)
3 BLUE (output)
4 MID2 (NC)
5 NC
6 R-GND
7 G-GND
8 B-GND
9 NC
10 GND
11 MID0 (NC)
12 MID1 (NC)
13 HSYNC (output)
14 VSYNC (output)
15 NC
12
3
4
5
6
KEYBOARD
Pin No. Signal
1 Keyboard data (input)
2 Msdata
3 GND
4 +5 V keyboard power supply
(output, max. 0.1 A)
5 Keyboard clock (output)
6 Msclock
Shield GND