List of Commands  CMU 
1100.4903.12 6.96  E-10 
Command  Parameters  Remarks  Page 
SAMPle:SUBarrays:SPECtrum[:CURRent]?  –128.0 dBm to +48.0 dBm  query only  6.56 
System STATus (status reporting system) 
STATus:OPERation:SYMBolic[:EVENt]? NONE | <Event>{,<Event>}  query only  6.63 
STATus:OPERation:SYMBolic:ENABle  <Event>{,<Event>} with query 6.63 
Subsystem TRIGger 
TRIGger[:SEQuence]:DEFault  ON | OFF  with query  6.29 
TRIGger[:SEQuence]:SLOPe  POSitive | NEGative  with query  6.28 
TRIGger[:SEQuence]:SOURce   IMMediate | RFPower | 
IFPower | EXTern 
with query  6.28 
TRIGger[:SEQuence]:SOURce:EXTernal  PIN6 | PIN7 | PIN8  with query  6.29 
TRIGger[:SEQuence]:THReshold:IFPower   <Threshold>  with query  6.28 
TRIGger[:SEQuence]:THReshold:RFPower   LOW | MEDium | HIGH  with query  6.28 
TRIGger[:SEQuence]:DEFault  ON | OFF  with query  6.31 
TRIGger[:SEQuence]:SLOPe  POSitive | NEGative  with query  6.30 
TRIGger[:SEQuence]:SOURce   IMMediate | RFPower | 
IFPower | EXTern 
with query  6.30 
TRIGger[:SEQuence]:SOURce:EXTernal  PIN6 | PIN7 | PIN8  with query  6.31 
TRIGger[:SEQuence]:THReshold:IFPower   <Threshold>  with query  6.30 
TRIGger[:SEQuence]:THReshold:RFPower   LOW | MEDium | HIGH  with query  6.30 
Subsystem WPOWer (wideband power) 
INITiate:WPOWer – no query 6.57 
ABORt:WPOWer – no query 6.57 
STOP:WPOWer – no query 6.57 
CONTinue:WPOWer – no query 6.57 
CONFigure:WPOWer:CONTrol:REPetition  CONTinuous | SINGleshot | 1 
... 10000, SONerror | 
NONE,STEP | NONE 
with query  6.58 
CONFigure:WPOWer:EREPorting SRQ | SOPC | SRSQ | OFF  with query  6.57 
FETCh:WPOWer:STATus? OFF | RUN | STOP | ERR | 
STEP | RDY, 1 ... 10000 | 
NONE 
query only  6.57 
READ[:SCALar]:WPOWer? <Result> query only 6.58 
FETCh[:SCALar]:WPOWer? <Result> query only 6.58 
SAMPle[:SCALar]:WPOWer? <Result> query only 6.58 
 
 
 
Table 6-3  List of remote-control commands: Audio Measurements 
Command  Parameters  Remarks  Page 
Subsystem AFANalyzer 
  
INITiate:AFANalyzer:SECondary – no query 6.68 
STOP:AFANalyzer:SECondary – no query 6.68 
STOP:AFANalyzer:SECondary – no query 6.68 
ABORt:AFANalyzer:SECondary – no query 6.68 
CONTinue:AFANalyzer:SECondary – no query 6.68