CMU A Short Tutorial on CMU Operation
1100.4903.12 2.3 E-9
How to use dialog elements in the menus
The dialog elements assigned to a softkey are selected by pressing the
softkey.
Different input fields can be selected by means of the 4 cursor keys
(blue frame shows active input field).
One of several elements in a list or toggle switch can be selected with
the rotary knob.
Numeric values can be either incremented/decremented using the ro-
tary knob or entered via the numeric keypad or an external keyboard.
For a comprehensive introduction to manual operation of the CMU refer to Chapter 3.
To Next Page
Loading...
