Connecting the CMU to the Test Setup CMU
1100.4903.12 1.16 E-10
Connecting an External Keyboard
KEYBOARD
The 6-contact Mini DIN connector at the rear of the instrument permits to
connect an external PC keyboard (PS/2) to the CMU. An external keyboard
facilitates the input of numbers and texts.
For the interface description see section "Hardware Interfaces" in chapter 8.
The assignment of the keys can be changed in the Misc. tab of the Setup
menu:
Language assignment
! To open the Setup – Misc. tab press the SETUP key at the front of the
instrument and activate the Misc. hotkey at the lower edge of the screen.
! Press the Keyboard softkey and set the desired key assignment (US or
German).
Connecting a Monitor
MONI TOR
The 15-contact Sub-D connector at the rear of the instrument permits an
external VGA monitor to be connected to the CMU.
For the interface description see section "Hardware Interfaces" in chapter 8.
To Next Page
Loading...
Need help?
General
