Rohde & Schwarz CMU 200 - Page 366

List of Commands CMU
1100.4903.12 6.100 E-10
Command Parameters Remarks Page
STEP | RDY, 1 to 10000 |
NONE
CONFigure:MULTitone:AF2Channel:TDEFinition <Freq_1>, <Lev_1>,
<Enable_1>, ... <Freq_20>,
<Lev_20>, <Enable_20>
with query 6.81
DEFault:MULTitone:AF2Channel:TDEFinition ON | OFF with query 6.83
CONFigure:MULTitone:AF2Channel:TDEFinition:MODE <Total_Level> with query 6.82
CONFigure:MULTitone:AF2Channel:TDEFinition:TLEVel <Total_Level> with query 6.82
CONFigure:MULTitone:AF2Channel:TDEFinition:TONE<nr> <Frequency>, <Level>, ON |
OFF
with query 6.82
CONFigure:MULTitone:AF2Channel:TONE<nr>:LIMit:LINE
:ASYMmetric:LOWer
<Limit>, <Enable> with query 6.80
CONFigure:MULTitone:AF2Channel:TONE<nr>:LIMit:LINE
:ASYMmetric:UPPer
<Limit>, <Enable> with query 6.79
CALCulate[:SCALar]:MULTitone:AF2Channel:TONE<nr>
:MATChing:LIMit?
<Result> query only 6.87
READ[:SCALar]:MULTitone:AF2Channel:TONE<nr>? –100.0 dB to +20.0 dB query only 6.86
FETCh[:SCALar]:MULTitone:AF2Channel:TONE<nr>? –100.0 dB to +20.0 dB query only 6.86
SAMPle[:SCALar]:MULTitone:AF2Channel:TONE<nr>? –100.0 dB to +20.0 dB query only 6.86
READ:ARRay:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.86
FETCh:ARRay:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.86
SAMPle:ARRay:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.86
READ:SUBarrays:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.87
FETCh:SUBarrays:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.87
SAMPle:SUBarrays:MULTitone:AF2Channel? –100.0 dB to +20.0 dB query only 6.87
DEFault:MULTitone:FILTer ON | OFF with query 6.85
DEFault:MULTitone:LIMit:LINE ON | OFF with query 6.81
DEFault:MULTitone:TDEFinition ON | OFF with query 6.83
Subsystem OPTions (options)
SYSTem:OPTions:INFO:CURRent? query only 6.65
Partial reset
SYSTem:RESet:CURRent no query 6.66