To Next Page

To Previous Page

CMU Tables

1100.4903.12 5 E-9

Tables

Table 1-1 Software installation with the VersionManager .................................................................. 1.20

Table 3-1

Operation of popup menus....................................................................................................3.9

Table 3-2 Assignment of numerical keys and alphanumeric characters............................................ 3.12

Table 3-3 Operation of select fields.................................................................................................... 3.14

Table 3-4 Measurements in function group RF (Non Signalling) ....................................................... 3.17

Table 3-5 Measurements in function group Audio (with option CMU-B41)........................................ 3.18

Table 4-1

Transmission parameters of the serial interfaces .............................................................. 4.12

Table 4-1 I/Q-IF scenarios and path settings ..................................................................................... 4.73

Table 5-1

Synchronization with *OPC, *OPC? and *WAI................................................................... 5.15

Table 5-2 Meaning of the bits used in the status byte........................................................................ 5.20

Table 5-3 Meaning of the bits used in the event status register......................................................... 5.21

Table 5-4 Meaning of the bits used in the STATus:OPERation:CMU:SUM1:CMU1

sub-register assigned to the CMU base system ................................................................ 5.22

Table 5-5 Meaning of the bits used in the STATus:OPERation:CMU:SUM1|2:CMU<nr>

sub-register assigned to RF Non Signalling....................................................................... 5.22

Table 5-6 Resetting instrument functions........................................................................................... 5.27

Table 5-7 Repetition mode in remote control ..................................................................................... 5.34

Table 6-1

Common Commands.............................................................................................................6.1

Table 6-1 List of remote-control commands: CMU base system ....................................................... 6.89

Table 6-2 List of remote-control commands: RF measurements ....................................................... 6.91

Table 6-3 List of remote-control commands: Audio Measurements................................................... 6.96

Table 6-4 Alphabetical list of remote-control commands: Base system........................................... 6.101

Table 6-5 Alphabetical list of remote-control commands: RF........................................................... 6.102

Table 6-6 Alphabetical list of remote-control commands: Audio ...................................................... 6.105

Table 8-1

Universal Commands ............................................................................................................8.4

Table 8-2 Addressed Commands..........................................................................................................8.4

Table 8-3 Transmission parameters of the RS-232 interface................................................................8.7

Table 8-4 Control strings or control characters of the RS-232-C interface ...........................................8.7

Rohde & Schwarz CMU 200 User Manual

Other manuals for Rohde & Schwarz CMU 200