Sel 2414 - Page 311

F.3IEC 61850 Communications
Logical Nodes
Date Code 20130214 Instruction Manual SEL-2414 Transformer Monitor
Logical Nodes
Table F.5 through Table F.3 show the logical nodes (LNs) supported in the
SEL-2414 and the associated Device Word bits or Measured Values mapped to
those LNs. Any differences between ICD file versions are also indicated in the
tables.
Table F.3 shows the LNs associated with annunciation element defined as Logi-
cal Device ANN.
ExTmp07 MV Temperature 7 O
ExTmp08 MV Temperature 8 O
ExTmp09 MV Temperature 9 O
ExTmp10 MV Temperature 10 O
ExTmp11 MV Temperature 11 O
ExTmp12 MV Temperature 12 O
Table F.2 Thermal Metering Data (Sheet 2 of 2)
Attribute Name Type Explanation T M/O
Table F.3 Logical Device: ANN (Annunciation) (Sheet 1 of 2)
Logical Nodes Status or Measurand Device Word Bits or Analog Quantities
Analog Quantities
MVGGIO12 AnIn01.mag to AnIn32.mag Math Variables (MV01 to MV32)
AINCGGIO26 AnIn01.mag to AnIn08.mag Analog Inputs (AI301 to AI308)—Slot C
AINDGGIO27 AnIn01.mag to AnIn08.mag Analog Inputs (AI401 to AI408)—Slot D
AINEGGIO28 AnIn01.mag to AnIn08.mag Analog Inputs (AI501 to AI508)—Slot E
AINZGGIO29 AnIn01.mag to AnIn08.mag Analog Inputs (AI601 to AI608)—Slot Z
RAGAIO30 Ra001.instMag to Ra032.instMag Remote Analogs (RA001 to RA032)
RAGAIO31 Ra033.instMag to Ra064.instMag Remote Analogs (RA033 to RA064)
RAGAIO32 Ra065.instMag to Ra096.instMag Remote Analogs (RA065 to RA096)
RAGAIO33 Ra097.instMag to Ra128.instMag Remote Analogs (RA097 to RA128)
SCGGIO34 AnIn01.instMag to AnIn32.instMag SEL
OGIC Counters (SC01 to SC32)
Device Word Bits
INAGGIO1 Ind01.stVal to Ind02.stVal Digital Inputs (IN101 to IN102)—Slot A
OUTAGGIO2 Ind01.stVal to Ind03.stVal Digital Outputs (OUT101 to OUT103)—Slot A
SVGGIO3 Ind01.stVal to Ind32.stVal SEL
OGIC Variables (SV01 to SV32)
SVTGGIO4 Ind01.stVal to Ind32.stVal SEL
OGIC Variable Timers (SV01T to SV32T)
LTGGIO5 Ind01.stVal to Ind32.stVal Latch Bits (LT01 to LT32)
TLEDGGIO6 Ind01.stVal to Ind08.stVal Target LEDs (ENABLED, TLED_00 to TLED_06)
PBLEDGGIO7 Ind01.stVal to Ind08.stVal Pushbutton LEDs (PB01_LED to PB04BLED)
RMBAGGIO8 Ind01.stVal to Ind08.stVal Receive M
IRRORED BITS (RMBA1 to RMBA8)
TMBAGGIO9 Ind01.stVal to Ind08.stVal Transmit M
IRRORED BITS (TMBA1 to TMBA8)
RMBBGGIO10 Ind01.stVal to Ind08.stVal Receive M
IRRORED BITS (RMBB1 to RMBB8)
TMBBGGIO11 Ind01.stVal to Ind08.stVal Transmit M
IRRORED BITS (TMBB1 to TMBB8)
INCGGIO13 Ind01.stVal to Ind08.stVal Digital Inputs (IN301 to IN308)—Slot C
INCEGGIO14 Ind01.stVal to Ind08.stVal Edge Trigger Operator (IN301E to IN308E)—Slot C
OUTCGGIO15 Ind01.stVal to Ind08.stVal Digital Outputs (OUT301 to OUT308)—Slot C
INDGGIO16 Ind01.stVal to Ind08.stVal Digital Inputs (IN401 to IN408)—Slot D
INDEGGIO17 Ind01.stVal to Ind08.stVal Edge Trigger Operator (IN401E to IN408E)—Slot D
OUTDGGIO18 Ind01.stVal to Ind08.stVal Digital Outputs (OUT401 to OUT408)—Slot D