3.8.11.3 Selecting the speed gear
The speed gears can be used in all three speed ranges and also in the forward
and reverse gears.
GUID-31E7AC23-E758-443E-BC92-0FF3643DB769
1. HiShift push button
2. Speed gear lever
NOTE: Use the speed gear lever, not the range gear lever, to set the
transmission to neutral when the engine is running.
1. Press down the clutch pedal or the HiShift push button.
2. Choose the wanted speed gear with the speed gear lever.
3. Release the clutch pedal or the HiShift push button.
3.8.11.4 Using Powershift
You can change the Powershift gear with push buttons.
NOTE: You can change the Powershift gear more than one step at a time,
directly from 1 to 3 for example, by double-pressing either Powershift button.You
can also change the Powershift gear several steps at a time by keeping either
Powershift button pressed down, which triggers multiple consecutive Powershift
gear changes.The number of the selected Powershift gear blinks on the A-pillar
display until the requested Powershift gear is engaged.
NOTE: When turning the power on when it has been switched off for over 10
seconds, the Powershift is always in the lowest stage.
3. Operation
- 100 -
To Next Page
Loading...
Need help?
General
