IMPORTANT: If the power-take off (PTO) is activated and the PTO speed
exceeds 1 800 rpm, the buzzer alarm goes off and the warning light (exclamation
mark) on the instrument panel is lit. Should this occur, immediately decrease the
rpm to prevent damage to the rotating parts of the PTO.
GUID-42E2DC1E-4E1E-4204-97B4-63C8E189C279
1. Rear PTO speed 540
2. Speed control lever for the rear PTO
3. Rear PTO speed 1000
4. Ground speed PTO
When the ground speed PTO is engaged, the switch for rear PTO does not
function, and the warning light on the instrument panel is not lit.
GUID-135DF10F-1DC4-4E6B-A81C-6FF0F38FCCCD
1. Switch for rear PTO
3.17.2.9 Adjusting the rear power take-off engagement
You can adjust the rear power take-off engagement according to your
preferences through the A-pillar display settings.
The index determines how quickly the rear power take-off engages. The value
range is between 0…5, with each value increasing the engagement speed by 0,2
s.
• 0 = the rear power take-off engages slowly.
• 5 = the power take-off engages quickly.
1. Stop the engine and turn the ignition switch off.
2. Engage the parking brake.
3. Operation
- 203 -
To Next Page
Loading...
Need help?
General
