Valtra HiTech T3 Series User Manual

1. Press the side opposite to the symbol on the cruise control increasing/
decreasing switch to lower the driving speed or the engine speed.
The cruise control setting decreases according to the following table.
Driving speed 1...10 km/h 10...15 km/h >15 km/h
Engine speed cruise
control (short press
(less than 2 seconds))
50 rpm 50 rpm 50 rpm
Engine speed cruise
control (continuous
press (over 2 seconds))
10 rpm 10 rpm 10 rpm
Driving speed cruise
control (short press
(less than 2 seconds))
0.1 km/h 0.2 km/h 1 km/h
Driving speed cruise
control (continuous
press (over 2 seconds))
0.1 km/h 0.1 km/h 0.1 km/h
2. Release the switch.
The new setting is activated and is stored in the memory.
3.8.14.7 Increasing the cruise control setting
1
A
U
T
O
A
U
T
O
M
I
N
M
A
X
P
GUID-388DFEF1-DB62-4C62-98C7-FA68A3AB51E7
1. Cruise control increasing/decreasing switch
1. Press the symbol side of the cruise control increasing/decreasing switch to
increase the driving speed or the engine speed.
The cruise control setting increases according to the following table.
Driving speed
1...10 km/h 10...15 km/h >15 km/h
Engine speed cruise
control (short press
(less than 2 seconds))
50 rpm 50 rpm 50 rpm
Engine speed cruise
control (continuous
press (over 2 seconds))
10 rpm 10 rpm 10 rpm
Driving speed cruise
control (short press
(less than 2 seconds))
0.1 km/h 0.2 km/h 1 km/h
Driving speed cruise
control (continuous
press (over 2 seconds))
0.1 km/h 0.1 km/h 0.1 km/h
2. Release the switch.
The new setting is activated and is stored in the memory.
3. Operation
- 112 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English