Valtra HiTech T3 Series User Manual

2. Press the side opposite to the symbol of the cruise control setting switch for
more than 2 seconds.
The cruise control indicator light blinks on the instrument panel indicating that
the setting value can be stored in the memory.
3. Release the button.
The setting is activated and stored in the memory. The indicator light is
continuously lit.
NOTE: If the driving speed cruise control is active, the engine speed cruise
control does not activate.
3.8.14.5 Activating and deactivating the engine speed cruise control
2
1
A
U
T
O
A
U
T
O
M
I
N
M
A
X
P
GUID-B4AB052E-ECFE-4FC9-9773-111552889744
1. Cruise control OFF button
2. Cruise control setting switch
• To activate the engine speed cruise control, press the side opposite to the
symbol of the cruise control setting switch.
• To deactivate the engine speed cruise control, press the cruise control off
button.
When the cruise control function has been turned off, the engine speed
returns to the speed set by the hand throttle if it is greater than the one set
with the accelerator pedal.
3.8.14.6 Decreasing the cruise control setting
1
A
U
T
O
A
U
T
O
M
I
N
M
A
X
P
GUID-388DFEF1-DB62-4C62-98C7-FA68A3AB51E7
1. Cruise control increasing/decreasing switch
3. Operation
- 111 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English