4.7.4.10 Changing hydraulic system oil filters
Change the hydraulic system oil filters periodically.
GUID-752A371E-F306-4A30-B6C2-60F70615CF9A
1. Pressure filter of the hydraulic system
Oil filters are located on the right side of the tractor under the cab. The return oil
filter is labelled with the text HYD on the mounting piece on top of it.
1. Fit a suitable container under the filter.
2. Clean the filter housing and the surrounding area.
3. Remove the filter housing and the filter element.
4. Wash the filter housing in clean diesel fuel.
5. Lubricate the seal of the new filter element.
6. Fit the new element into place.
7. Refit the filter housing.
Tighten the filter housing with a suitable wrench to a torque of 200 Nm.
4. Maintenance
- 272 -
To Next Page
Loading...
Need help?
General
