3. Deactivate the continuous floating position:
• Press the continuous floating position activation switch side opposite to
the symbol.
• Press the front loader hydraulics on/off switch side opposite to the symbol.
• Turn the ignition key to the stop position.
• Press the upper push button on the joystick (when the symbol side of the
floating position activation switch is pressed down)
NOTE: If both the front loader hydraulics on/off switch and the floating
position activation switch are symbol side pressed down, the floating
position can be controlled ON and OFF with the joystick push buttons.
3.16.5 Using the floating position with joystick buttons
You can use the floating position when working with certain types of implements
which have to follow the ground surface. Such implements are, for example,
sowing machines and rollers.
The floating position has to be activated every time the power has been turned on.
WARNING: Keep the floating position deactivated when it is not needed.
GUID-FCEF9D97-1ABA-4408-B300-D87ADCBE6B04
1. Joystick
2. Floating position indicator light
3. Front loader hydraulics indicator light
4. Floating position activation switch
1. Activate the auxiliary hydraulics.
The front loader hydraulics indicator light is lit.
2. Activate the floating position by pressing the symbol side of the floating
position activation switch.
The floating position is activated but not in use.
When the floating position is activated with the floating position activation
switch, the push buttons on the joystick can only be used for controlling the
floating position.
3. Operation
- 190 -
To Next Page
Loading...
Need help?
General
