3.8.4 Adjusting the power shuttle engagement speed
You can adjust the power shuttle engagement speed through the tractor terminal
transmission settings.
The index determines how quickly the torque of the power shuttle increases to
the maximum value when the clutch is engaged. The index affects both the F
(forward) and R (rearward) clutch engagements. The value ranges from 1–10,
where:
• 1 = very slow engagement
• 10 = very quick engagement
1. Stop the engine and turn the ignition switch off.
2. Engage the parking brake.
3. Press the pre-programming push button, depress the clutch pedal and turn
the ignition on at the same time.
The setting menu symbols (D) appears on the display. The first two bars are
lit to indicate that the parameter number is shown on the bottom row.
4. Press the Powershift push buttons to select the parameter to be changed.
GUID-28D5159D-C9B9-404C-850F-29935043418E
The parameter number for power shuttle engagement speed is 0030.
3. Operation
- 91 -
To Next Page
Loading...
Need help?
General
