WARNING: When you do not need the power take-off (PTO), keep the
PTO switch in off position.
WARNING: Use the power take-off (PTO) speed control lever for the
actual disengagement and engagement of the PTO. For example,
when leaving the cab, move the lever to the centre position, except
when using the PTO on/off push button on the mudguard (extra
equipment).
• Press down the symbol side of the PTO switch and release it.
GUID-135DF10F-1DC4-4E6B-A81C-6FF0F38FCCCD
1. Switch for rear PTO
• Push the PTO speed control lever towards the side panel to disengage the
PTO.
This is useful when you must stop the PTO fast, for example in an emergency.
• Press the rear PTO on/off push button on the rear mudguard once.
After this, the rear PTO on/off push button operates as a start button when
pressed for more than 3 seconds.
The indicator light on the instrument panel flashes indicating that the PTO
speed control lever is engaged. Using the PTO switch, the disengagement is only
temporary.
3.17.2.5 Deactivating rear power take-off
WARNING: When you do not need the power take-off (PTO), keep the
PTO switch in off position.
WARNING: Use the power take-off (PTO) speed control lever for the
actual disengagement and engagement of the PTO. For example,
when leaving the cab, move the lever to the centre position, except
when using the PTO on/off push button on the mudguard (extra
equipment).
3. Operation
- 199 -
To Next Page
Loading...
Need help?
General
