Operating hours
Operating hours are displayed with an accuracy of one decimal place when the
power is on.
Driving speed (km/h / mph)
When the driving speed is under 3 km/h, the symbol L is shown in the display.
The display shows up to 15 km/h to one decimal place.
The driving speed unit (km/h / mph) can be changed only by an authorised
workshop.
.
3.10.2 Selecting a view
You can select different functions to be displayed on the top row.
GUID-21ED38BC-2942-4814-90BE-8D58D36D960B
1. Top row
2. Bottom row
3. Agroline instrument panel display change-over switch
1. Change the view by pressing the symbol side of the display change-over switch.
3.10.3 Top and bottom row views
The Agroline instrument panel display functions are seen on the top or the bottom
row.
The following functions can be displayed on the top and bottom rows of the display:
Symbol
Function
m, km/miles Travel distance (m/km/miles)
Rear power take-off (PTO) speed (rpm)
Front power take-off (PTO) speed (rpm)
Clock
Table continued on next page
3. Operation
- 144 -
To Next Page
Loading...
Need help?
General
