Valtra HiTech T3 Series User Manual

3.12.1 Diagnose light
When the tractor power is turned on, the diagnose light is lit for a moment, goes
out and is lit again. The lit diagnose light indicates that the linkage has not been
activated.
1
A
U
T
O
A
U
T
O
M
I
N
M
A
X
P
GUID-0C39C0DB-07EE-4F45-8E6A-6B8CC1772846
1. Diagnose light
IMPORTANT: Contact your dealer if the diagnostic light is flashing (the service
code is displayed on the tractor terminal). This means that there is a system
failure.
3.12.2 Activating the linkage
You can activate the linkage with the lift/stop/lower switch.
The linkage has to be activated every time the power has been turned on or
when the lift/lower push buttons have been used.
1
GUID-BE681160-0A90-44BA-85FE-8C37C5CDCDBC
1. Lift/stop/lower switch
3. Operation
- 157 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English