• To switch on the headlights, press down the symbol side of the light switch.
When the light switch is in this position, the main beams can be switched on
by the multifunctional lever.
NOTE: If the power is turned off when the headlights or parking lights are on,
the buzzer goes on. If lights are turned on when the power is off, the buzzer
does not go on.
• To turn on the main beams, pull the multifunctional lever towards yourself.
• To use the headlight flasher, move the multifunctional lever towards yourself
when the headlights are on.
• To switch off the headlights, press down the side of the light switch opposite
to the symbol.
3.4.2 Using upper headlights
The upper headlights are extra equipment.
GUID-ED83F79D-FD85-401B-B18F-ED3FA876289B
1. Upper headlight switch
1. Press the symbol side of the switch to switch on the upper headlights.
When the upper headlights are on, the front lower headlights are off, and vice
versa.
2. Press the side of the switch opposite to the symbol to switch off the upper
headlights.
3.4.3 Using working lights
The parking lights must be switched on before the rear or front working lights
work.
• The switches for the front working lights have two positions: on/off.
• The switches for the rear working lights have three positions: on/automatic/off.
IMPORTANT: If the tractor is equipped with the Infolight Xenon package, always
turn off all the working lights before turning the power on. It is recommended to
turn on Xenon working lights one by one because they need a lot of power when
ignited.
3. Operation
- 72 -
To Next Page
Loading...
Need help?
General
