Valtra HiTech T3 Series - Changing the Alternator and Air Conditioning Compressor Belt

5. Fit the new fan and air pressure compressor belt.
Loosen the automatic belt tensioner by using a 1/2" wrench.
2
1
GUID-CDB5D24F-9498-49E3-AA56-3207A456B3EB
1. Automatic belt tensioner
2. 1/2" wrench
6. Push the front PTO clutch back in position.
7. Tighten the front PTO clutch hub screws.
8. Fit the front PTO clutch screws.
4.7.3.12 Changing the alternator and air conditioning compressor belt
2
1
GUID-93CAB70E-6E32-47B9-A9A5-9D0A7B11456E
1. Fan and air pressure compressor belt
2. Alternator and air conditioning compressor (extra equipment) belt
Changing the alternator and air conditioning compressor belt requires special
tools. Contact an authorised Valtra workshop in case this belt needs to be changed.
4. Maintenance
- 260 -