• Adjust the suspension.
The operator weight display shows the settings for operators of different
weights.
• To increase the suspension, turn the suspension adjustment lever
clockwise.
• To decrease the suspension, turn the suspension adjustment lever anti-
clockwise.
• Adjust the height of the seat.
You can lift the seat from the basic position to two higher positions.
• To lift the seat, pull it slowly upwards until you hear a click.
• To lower the seat, pull it up to the top position and then let it to drop to
the desired position.
• Fasten the seat belt to the anchor point on the seat.
• Adjust the backrest inclination.
• Pull up the backrest inclination adjustment lever.
• Set the backrest to the desired position.
• Adjust the left armrest.
• Remove the cover.
• Change the armrest position in the mounting slot.
• Turn the seat heating on or off.
3.2.2 Adjusting the air-suspended driver's seat
You can adjust the air-suspended driver's seat according to your height and
weight. With these adjustments you can minimize the exposure to vibration,
obtain the best support for your lower back and get the most comfortable driving
position. Note that you may need to change the adjustments according to work
conditions or the components you are using such as the tyre type. The air-
suspended driver's seat is extra equipment.
CAUTION: Do not attempt to adjust the seat while driving. There is an
increased risk of loss of control.
3. Operation
- 56 -
To Next Page
Loading...
Need help?
General
