Valtra HiTech T3 Series User Manual

2. Release the switch.
When the calibration is done, the light goes out.
3. If the flashing does not stop within 2 minutes, start the calibration again.
3.8.19.3 Deactivating front axle suspension
1 2 3
1 2 3
O
N
GP
S
O
FF
A
UT
O
ON
G
P
S
O
F
F
A
UT
O
1
GUID-44EBB37E-A899-49B8-812A-5B81D0FCFF67
1. Front axle suspension deactivation / AutoComfort calibration switch
1. Check that the power shuttle lever is not in the parking brake position.
2. Press down the side of the switch opposite to the symbol.
3. Operation
- 119 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English