3.6.4.5 Automatic air conditioning system on/off button
GUID-D5681DD7-43B5-446A-8201-86C087D10D1D
1. Automatic air conditioning system on/off button
• When the automatic air conditioning is on, the amber indicator LED is lit.
• When the automatic air conditioning is off, the compressor and the indicator
LED are off.
• When the indoor-air recirculation is activated, the automatic air conditioning
is normally on. Switching off the air conditioning by pressing the automatic air
conditioning system on/off button turns off the compressor and activates the
ECO mode.
3.6.4.6 Temperature view
The selected temperature is displayed on the display.
• Within the range of 20-24°C, the temperature is displayed with an accuracy
of 0.5°C.
• Outside the range of 20–24°C, the temperature is displayed with an accuracy
of 1°C.
• If adjusted below 18°C, LO is displayed.
• If adjusted over 28°C, HI is displayed.
When the recirculation of the indoor air is active, the display shows HI, LO or the
tractor symbol depending on the situation.
3.6.4.7 Temperature control
You can adjust the cab temperature with the temperature control knob.
GUID-2E45CB01-D5C2-46B9-8BE2-20E32B3D338D
1. Display
2. Temperature control knob
Adjust the cab temperature with the temperature control knob. The selected
target temperature is shown on the display. Note that the selected temperature is
a target value that may not be reached in extreme cold/heat conditions.
3. Operation
- 83 -
To Next Page
Loading...
Need help?
General
