Valtra HiTech T3 Series User Manual

4.8.10.2 Maintaining the automatic jaw of the wagon towing device
Maintain the automatic jaw of the wagon towing device regularly.
1
5
4
3
2
GUID-CE9DE3E8-B494-411B-9DB2-6930B53DF2CC
1. Main pin
2. Control unit of the puller pin
3. Nipple 1
4. Nipple 2
5. Locking pin (2 pcs)
• Regularly clean the main pin, control unit of the puller pin and locking pins.
Do not use pressure wash when cleaning the main pin.
• Grease nipple 1 regularly with Calsium LF grease.
• Turn the jaw from left to right at least 90º after greasing.
This ensures that the grease spreads evenly to the desired surfaces.
IMPORTANT: If the jaw is rusty, for example due to the fertiliser, do not use a
rust-loosening agent for removing the rust but take it to an authorised Valtra
workshop.
• Grease nipple 2 with Calsium LF grease if necessary or at least every 1000
hours.
4. Maintenance
- 325 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English