IMPORTANT: If the tractor is equipped with the Infolight Xenon package, do not
turn the lights more than 10 degrees up or down. If the lights are turned more
than 10 degrees, the Xenon bulbs operating time is significantly shorter.
GUID-55F65146-5180-4614-B3E1-5BD528BF9101
1. Switch for front working lights
2. Switch for rear working lights
3. Switch for front waist working lights (extra equipment)
4. Switch for rear waist working lights (extra equipment)
• To use the lights manually, press down the symbol side of the switch.
• To use the rear working lights automatically, press the switch to the centre
position.
The rear working lights switch on when the reverse drive is engaged. The
lights switch off when the reverse drive is disengaged.
NOTE: The automatic function does not work when reverse drive controls
(extra equipment) are used.
• To turn off the lights, press down the side of the switch opposite to the symbol.
3.4.4 Using the trailer hitch light
The trailer hitch light is extra equipment.
The trailer hitch light is positioned in the power take-off (PTO) cover.
3. Operation
- 73 -
To Next Page
Loading...
Need help?
General
