EasyManuals Logo

Valtra HiTech T3 Series User Manual

Valtra HiTech T3 Series
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #294 background imageLoading...
Page #294 background image
9. Check that the oil level is between the marks.
10. Start the engine and check the oil level.
4.7.6.2 Cleaning the suction strainer
Drain the oil from the transmission.
1
2
1
GUID-DD716079-A81F-42D4-BE09-38D441883771
1. Suction strainer cover
2. Suction strainer
1. Remove the suction strainer cover.
2. Wipe off any oil which has run out on the chassis.
3. Clean the suction strainer in diesel fuel.
Replace the suction strainer if it is damaged.
4. Dry the suction strainer with compressed air.
5. Refit the suction strainer, gaskets and cover.
Fill the transmission with oil.
4.7.6.3 Changing the transmission breather
Change the transmission breather periodically.
IMPORTANT: If the tractor is used continuously in dusty conditions, the breather
must be changed more frequently.
4. Maintenance
- 293 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valtra HiTech T3 Series and is the answer not in the manual?

Valtra HiTech T3 Series Specifications

General IconGeneral
BrandValtra
ModelHiTech T3 Series
CategoryTractor
LanguageEnglish

Related product manuals