4. Open the bleeding nipples.
There is one bleeding nipple on both sides.
GUID-556CB2D9-69CC-419C-AAE0-E47D46D443F1
1. Bleeding nipple
5. Put a hose from both bleeding nipples to containers.
6. Pump the brake pedals until there are no air bubbles in the oil.
The oil has been changed when about 0.2 litres has come out from each
side.
It is not necessary to adjust the front brakes.
4.7.6.7 Cleaning the cooling system
Clean the cooling system periodically.
If problems occur with the cooling system, it can be a sign that the whole system
needs to be thoroughly cleaned.
1. Stop the engine.
2. Open the cap of the expansion tank.
CAUTION: Open the expansion tank cap carefully. When running
the tractor the expansion tank has an overpressure of 1.0 bar.
GUID-A97612C3-60F1-4527-AFB3-AE079D82C833
1. Cap of the expansion tank
4. Maintenance
- 297 -
To Next Page
Loading...
Need help?
General
