Valtra HiTech T3 Series User Manual

3.12.16 Using the slip control
You can use the slip control when the draft control selector is in the draft control
area.
3
1
4
5
6
2
A
U
T
O
A
U
T
O
M
I
N
M
A
X
P
GUID-35CA544E-9324-4564-B620-41037E583B78
1. Draft control selector
2. Drive balance control and slip control position
3. Slip limit position
4. Drive balance control selector
5. Drive balance control light
6. Slip control light
• Turn the drive balance control selector to the drive balance control and slip
control position.
Both the drive balance control and slip control are activated.
The slip control is activated when the lift/stop/lower switch is in the lower
position and the draft control selector is in the draft control area (position 1-8).
The slip control light is lit when the slip control is activated and driving speed
is more than 1 km/h.
• Turn the drive balance control selector to the slip control position.
Only the slip control is activated.
The draft control selector must be in the draft control area (position 1-8).
The slip control light is lit when the slip control is activated and driving speed
is more than 1 km/h.
3. Operation
- 167 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English