1. To enlarge the middle row, press the side of the display setting switch
opposite to the symbol.
The top row vanishes, and the middle row enlarges to a height of two rows.
2. Press the switch again to return to the normal view.
3.9.7 Changing parameters
3.9.7.1 Activating and exiting the setting mode
You must activate the setting mode to change the different settings.
GUID-C874386F-E735-4621-84F4-F4F1F682265B
1. Proline instrument panel display setting switch
1. Activate the setting mode.
Press and hold down the symbol side of the display setting switch for more
than three seconds.
2. Display the available parameters.
Press the side of the display setting switch opposite to the symbol. The
available parameters are presented in the following table.
Parameter
Parameter value
Display backlight level 1–7
Implement width 0–6 500
Hour display Hours
Minute display Minutes
Clock mode 12–hour or 24–hour
Speed ratio ppm Not in use
Direction indicator buzzer status On or off
Temperature unit Celsius or Fahrenheit
Length unit Metric or imperial
Volume unit Litre or UK gallon or US gallon
Front power take-off speed view On or off
Front lower links' position view On or off
Display contrast 80–120
3. Operation
- 137 -
To Next Page
Loading...
Need help?
General
