Valtra HiTech T3 Series User Manual

4.8.2.3 Rear axle track widths
The rear axle track widths (in mm) are listed in the following table.
18.4R38,
460/85R38
2 012 1 910 1 808 1 714 1 612
20.8R38,
520/70R38,
520/85R38,
480/80R42
2 012 1 910 1 808 1 714
540/65R38 1 910 1 808 1 714
580/70R38,
600/65R38,
650/60R38
1 910 1 808
620/70R42 1 910 1 811
650/60R38,
650/65R42,
710/70R38
1 811
270/95R48 2 022 2 000 1 922 1 900 1 622 1 600 1 522 1 500
4.8.3 Using chains
Chains can be used on the front wheels only when they are also used on the rear
wheels.
IMPORTANT: With larger tyres and a suspended cab (extra equipment), the
space between the mudguard and the tyre may become too small (under 25
mm). If the space is not large enough when you need to use the chains, adjust
the mudguards.
• Make sure that the chains are correctly tightened to avoid damaging the
mudguards.
4. Maintenance
- 310 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English