Valtra HiTech T3 Series User Manual

6.9.5 Rear power take-off
6.9.5.1 Rear power take-off alternatives
Power take-off (PTO)
alternatives
T133 H T153 H T173 H T193 H
540 + 1000 x x x
540 + 1 000 + PGS
PTO
1)
x x x
1 000 EHD x x x x
1 000 EHD + PGS
PTO
x x x x
540 + 540 E x x x
540 + 540 E + PGS
PTO
x x x
1 000 + 540 E x x x x
1 000 + 540 E +
PGS PTO
x x x x
1)
Proportional ground speed PTO
6.9.5.2 Rear power take-off ratios
Rear power take-off (PTO) ratios
540 rpm at engine speed 1 874 rpm
1 000 rpm at engine speed 2 000 rpm
540 E = 540 rpm at engine speed 1 539 rpm
6.9.5.3 Rear power take-off shafts
As standard tractor is equipped with one power take-off shaft. Additional shafts
are extra equipment.
Splines
Standard Shaft diameter (mm)
6 splines ISO 500 35
21 splines ISO 500 35
20 splines
1)
ISO 500 45
6 splines ASAE (Valtra 1203) 45
8 splines GOST 3480-58 38
1)
Standard
6.9.5.4 Lower link end distance from rear power take-off shaft
The length of the
lower links (mm)
Power take-off (PTO) shaft (T measure, mm)
6 splines 21 splines 8 splines 20 splines 1¾ 6 splines
940 740 740 755 722 742
6. Technical specifications
- 351 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English