ECO mode
Switching off the air conditioning with the air conditioning system on/off button
activates the ECO mode. The air cooling compressor is turned off and the system
tries to achieve the target temperature by other available means, such as fresh
air intake and fan speed.
3.6.4.4 Controlling the fan
GUID-10CA7AA6-0D35-400C-8844-C7ACAF2351BC
1. Fan control knob
2. Display
3. AUTO position
4. OFF position
5. Air conditioning system on/off button
• Activate the air conditioning system to increase the fan speed by pressing the
air conditioning system on/off button.
The efficiency of the fan speed can vary when the system tries to maintain
the adjusted cab temperature. An increase in the sun heat radiation
increases the fan speed.
• Activate the automatic fan speed mode.
• To activate the automatic mode, turn the fan control knob to the AUTO
position.
• To activate the ECO mode, press the air conditioning system on/off
button when the fan control knob is in the AUTO mode.
If the selected cab temperature is lower than the outdoor temperature, the
numerical value of the temperature flashes on the display.
The fan speed changes gradually.
• Adjust the fan speed manually.
To change the fan speed from the default value of the AUTO position, turn
the fan control knob to the desired position.
The fan speed changes immediately.
• To deactivate the air conditioning system, turn the fan control knob to the
OFF position.
• The fan turns off.
• The recirculation of the indoor air is on, as indicated by the
symbol
on the display.
3. Operation
- 82 -
To Next Page
Loading...
Need help?
General
