• Tighten all screws and nuts of the front linkage after the first 15-25 running
hours.
• Check that the hydraulic connections have no leaks.
• Grease the lifting cylinder pins and the lifting links shaft with Universal
Grease every 50 hours.
The grease nipple for the lifting links shaft is located on the rear side of the axle.
GUID-47B9E928-6736-4DCB-8F01-80B42F67D74A
1. Grease nipples
4.7.3.5 Checking the front power take-off
• Tighten all fixing screws after the first 15-25 running hours.
• Check regularly that all fixing screws are tight.
• Check that the hydraulic connections have no leaks.
4. Maintenance
- 254 -
To Next Page
Loading...
Need help?
General
