3.8.6 Using the clutch pedal
GUID-0FDC0EEE-E513-40D2-B148-7C426A433C57
1. Clutch pedal
1. Press the clutch pedal to release the traction.
2. Let the clutch pedal up gradually.
IMPORTANT: Never rest your foot on the clutch pedal while driving.
IMPORTANT: Do not allow the clutch to slip more than necessary when
moving off.
WARNING: Do not descend slopes with the clutch pedal pressed down.
WARNING: In turbine clutch models, always apply the parking brake
or block the wheels when parking. The transmission in these models
does not brake.
3.8.7 Adjusting the clutch pedal engagement position
You can adjust the clutch pedal's engagement position and clutch slipping
properties according to your preferences through the A-pillar display settings.
The index determines how quickly the clutch engages when the clutch pedal is
raised. The value range is between 1…4.
• 1 = the clutch engages quickly, the engagement point is relatively low.
• 4 = the clutch engages slowly, the engagement point is relatively high.
1. Stop the engine and turn the ignition switch off.
2. Engage the parking brake.
3. Operation
- 94 -
To Next Page
Loading...
Need help?
General
